Does your PC reach incredibly high temperatures when you are running the latest games or simulation software? Do you want to ensure your CPU lasts as long as it can and constantly provides high performance? Have you long considered adding a cooling system to your PC but just cant choose which is best suited for you and your PC? Then this top 10 list will help guide you as we have not only compiled what we think are the best coolers currently on the market, but we have also provided a helpful buyers guide.
If you are looking to improve your PC but can’t figure out what your next bit of hardware should be then perhaps consider a CPU cooler. Whilst they may not appear to be as big of an upgrade as say a new video card, they can enhance your gaming setup considerably. By keeping temperatures low and performance high your PC will be running smoother than it ever has.
There has never been a better time to get a new aftermarket cooler for your PC than now, read on to see what we have listed as our top picks! Each and every recommendation has a list of benefits to meet your dreams – so you won’t have to make loads of compromises.
If you’re looking for the best of the best in terms of equipment to kit out your PC, be sure to have a look at our best budget power supplies (PSU).
The Best Budget Cooler for CPU Picks
Our List of Top 10 Best CPU Coolers 2020
- Cooler Master MasterAir G100M
- Noctua NH-D15
- Corsair H100i Pro
- UpHere Liquid 120
- Cooler Master Hyper 212
- NZXT Kraken M22
- Deepcool Gamaxx 400
- Be Quiet! BK021 Dark Rock
- Arctic Liquid Freezer 120
- Noctua NH L9i
1. Cooler Master MasterAir G100M
Intel Compatibility: LGA 2066 / 2011-v3 / 2011 / 1151 / 1150 / 1155 / 1156 / 1366 / 775
AMD Compatibility: AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2+ / FM2 / FM1
Revolutions per Minute: 600 – 2400 RPM
Noise volume: 30.0 dB
Dimensions (W x D x H): 145 x 145 x 74.5 mm
Straight up on our list of CPU coolers we have the Cooler Master MasterAir G100M, offering one of the most unique designs on this list. Offering a multitude of different models depending on the amount of pipes you wish to utilize. The built in aluminium fins offer a substantial improvement to this coolers heat dissipation ensuring your CPU never reaches high temperatures.
The unique UFO esque design would be a welcome addition to any computing system which is only reinforced due to the use of RGB lighting. Discreet this cooler is not, so if you are looking for one to suit that niche then you may be better looking elsewhere as this cooler is both flashy and bold. If your desktop features a transparent panel then prepare to impress your friends with it’s unique but functional design.
Functionally, this CPU cooler is also no slouch as the intuitive heat column provides an all encompassing contact surface size with the CPU this is used to cool. This provides a rapid cooling system that will keep your machine chugging along for years to come.
If you are looking for a one of the best looking fan coolers you can get alongside impressive functionality, then you would be hard pressed to find a better choice than the MasterAir G100M!
2. Noctua NH-D15
Intel Compatibility: LGA1200, 1150, 1151, 1155, 1156, LGA2011, LGA2066
AMD Compatibility: AM4, AM3(+), AM2(+), FM1, FM2(+)
Fan Speed: 300 – 1500RPM
Noise volume: 24.6dB
Dimensions (W x D x H): 140x150x25 (with 120mm mounting holes), 140x140x25 (with 120mm mounting holes), 120x120x25
Weight: 1320 g
Next up in our top CPU coolers we have the exceptionally well designed Noctua NH-D15 offering impressive cooling power ensuring constantly low PC temperatures. Offering comparable performance with some of the top liquid CPU coolers at a fraction of the price, this is an incredible fan based cooling system.
Offering a modest but executive based design, this cooler provides all the power you would expect from bolder fan systems. The lack of LED lighting may turn some off in a current light focused market, but we can assure that this neat design will look great in a variety of systems. What it lacks in lighting it more than makes up in performance providing one of the best fan cooling devices currently on Amazon today.
You may also be excited to hear that this fan is ridiculously quiet, so quiet in face that you may sometimes wonder if it is still running smoothly. This low profile cooling system also offers automatic speed control due to it’s PWM interface. That’s not all though, as you will find it is also really easy to install, what more could you possible want from a cooling system?
3. Corsair H100i Pro
Intel Compatibility: LGA 1200, 1150, 1151, 1155, 1156, 1366, 2011, 2066
AMD Compatibility: AMD AM4, AM 3, AM2, sTRX4*, sTR4* *Requires an additional bracket purchase
Fan Speed: 400 – 2400RPM
Noise volume: 10 – 37 dB
Dimensions (W x D x H): Radiator 276mm x 120mm x 27mm. Fan 120mm x 120mm x 25mm
Weight: 744 g
Our first liquid CPU cooler on this list, the Corsair H100i Pro could also be the greatest liquid system on the market today. Coming from one of the biggest names in the field of computer hardware and coolers, you can be certain that this liquid CPU cooler will provide exceptional cooling power. Hook this up to a spare PWM slot on your motherboard for accurate fan speed control.
Coming in 3 different sizes, this cooler should fit inside most computer cases so dimensions shouldn’t be an issue. The H100i works alongside the iCue software, meaning you have full control over the LED lighting on this sleek liquid cooler. Copper heat pipes ensure extreme thermal conductivity, which alongside the built in fan provides unprecedented cooling prowess. This cooler is also built to last due to it’s exceptional build quality, check out all the incredibly high product reviews on amazon to see for yourself!
If you are looking for an entry level liquid cooler at this price range then the Corsair H100i pro could very well the be cooling system for you.
4. upHere Liquid 120
Intel Compatibility: LGA20XX, LGA1366, LGA115.X
AMD Compatibility: AM4, AM3+, AM 3, AM2+, AM2, FM2+, FM2, FM1
Fan Speed: 600 – 1700RPM
Noise volume: 16.1 – 27.7 dB
Dimensions (W x D x H): 120mm X 120mm X 25mm
Weight: 1166 g
If you are looking for an entry level low priced liquid cooling system then the upHere Liquid 120 could be the perfect option for you. Potentially the cheapest cooler on this list, not only amongst liquid devices but fan based ones as well, the upHere Liquid 120 offers insane price to performance ratio. The low noise level ensures you can work away without worrying about disturbing any parents or siblings in the house.
Utilizing a single fan on top of solid aluminium fins, this system will keep your CPU temperature exceptionally low. Cooling control is also excellent as this option features PWM compatibility allowing your PC to deduce the correct revolutions per minute at the correct time. It also offers an instantly attractive LED lighting system, covering a whole spectrum of colors; you can adapt this to your PC design easily. The heat tubes themselves are made from high quality rubber with offers both high corrosion resistance and crush prevention, they should last a long time.
Finding a liquid cooler for under $80 can be extrememely tricky, but look no more as the upHere Liquid 120 offers all the processor cooling you could ever need!
5. Cooler Master Hyper 212RGB
Intel Compatibility: LGA 1366, 1155, 1151, 1150
AMD Compatibility: FM2, FM1, AM3+
Fan Speed: 600 – 2000RPM
Noise volume: 9 – 36 dB
Dimensions (W x D x H): 120mm x 120mm x 25mm
Weight: 569 g
When it comes to finding a cooling system that suits you, the Cooler Master Hyper offers remarkable heat dissipation at an even more impressive low price. Coming in both a plain modest designs or on featuring RBG all PC users will find something to love here. One of the best featured today when it comes to cooling capacity and supported by sleek black aluminum fins, this is a top pick regardless what you are looking for.
Slick aluminum fins ensures the airflow throughout your entire PC case is as good as it can get, lowering not only the processors temperature, but the whole system to boot. The inbuilt copper heat pipes utilize Direct Contact technology to keep temperature low and performance high. Air CPU coolers of this quality are rare at this price range.
Small form but high performance make this CPU air cooler stand out amongst a roster of some of the greatest, if you are looking for a new cooler, keep this cooling system in mind.
6. NXZT Kraken M22
Intel Compatibility: LGA 1200, 1151, 1150, 1155, 1156, 2011, 2011-3, 2066
AMD Compatibility: AM 4, FM2+, FM2, FM1, AM3+, AM 3, AM2+, AM 2
Fan Speed: 500 – 2000RPM
Noise volume: 21 – 36 dB
Dimensions (W x D x H): Radiator: 152mm x 120mm x 32mm, CPU Water Block: 65mm x 65mm x 48mm
Weight: 880 g
For our next choice of the top CPU coolers we have the NXZT Kraken M22, our pick for the best looking cooler on this list. If you like showing off your PC then this is the choice for you as the unique infinity mirror interface provides a futuristic feel. NXZT are one of the newer names on the market when it comes to computer peripherals but they have quick become highly reputable.
Looks isn’t all that this nifty bit of hardware provides as it’s cooling prowess is exceptionally high end. The all new Aer P radiator fans are designed with CPU cooler perfection in mind, taking the temperate levels of your PC down rapidly. NXZT have gone above and beyond when it comes to usability as they have also provided CAM software that you can use on both your desktop and a mobile device. Direct cintact copper heat pipes constantly transfer the heat away from the your CPU then return it ice cold.
Water coolers at this price point tend to fall short in one way or the other, but the MXZT is an exception to this list. Low noise level, excellent performance and impeccable fan design make this a must buy for any one who wishes to cool their CPU down.
7. Deepcool Gamaxx 400
Intel Compatibility: LGA 20XX, 1366, 115X, 775
AMD Compatibility: AM4, AM3+, AM 3, AM 2+, AM 2, FM2+, FM2, FM1
Fan Speed: 900 – 1500RPM
Noise volume: 17.8 – 30 dB
Dimensions (W x D x H): 120mm x 120mm x 25mm
Weight: 681 g
The cheapest CPU air cooler on the list but far from the least powerful, the Deepcool Gamaxx 400 is a great beginners pick. 4 direct contact heating pipes rapidly reduce your processors temperature with little fun and a surprisingly low noise level. Specialized fin clips offer a low profile cooling design with room to attach an extra fan if needed. Aluminum fins also add prove an aerodynamic structure aiding heat dissipation throughout the PC case.
This impressive CPU cooler is easy to install and comes in multitude of colors so you are sure to find one to suit your hardware collection. Installing this CPU doesn’t require you to remove your mother board from your desktop saving you added hassle when it comes to installing this PC fan.
As this CPU cooler uses a PWM connection, the speed of this heat column CPU cooler can be controlled by your PC without you needing to constantly manually adjust it. Making this airflow fan one of the number one picks on this list. If you are wanting save some cash and are willing to take a risk on a newer name, then the Deepcool Gamaxx 400 is the CPU cooler for you.
8. Be Quiet! BK021 Dark Rock
Intel Compatibility: LGA 1200 / 1150 / 1151 / 1155 / 1156 / 1366 / 2011(-3) Square ILM / 2066
AMD Compatibility: AM2(+), AM3(+), AM4, FM1, FM 2(+)
Fan Speed: N/A
Noise volume: 10.5 – 21.4 dB
Dimensions (W x D x H):
Weight: 916 g
Almost entirely silent, the Be Quiet! BK021 Dark Rock features the lowest noise level you can find when it comes to CPU coolers. Offering some of the best results under extreme testing, this cooling system offers some of the lowest overall temperatures you will find anywhere. As you may know, low CPU temperature means high performance, making this an incredible addition to any gaming set up.
The unique fan design means you will never worry about your noise level which is rare to see in the world of cooling solutions. The copper heating pipes disperse heat throughout your CPU and thanks to the powerful air intake the heat column provides, cooling will never be a worrisome problem again. Airflow is dispersed throughout your computer cooling your CPU and surrounding components giving you the low temperatures you crave.
If you constantly worry that fans are a noisy cooler type but still don’t want to shell out for a liquid system then this delightful chunk of hardware will make an incredible addition to your computer.
9. Arctic Liquid Freezer II 120
Intel Compatibility: LGA 1200, 115.X, 2011-3*, 2066* *Square ILM
AMD Compatibility: AM4
Fan Speed: 200 – 1800RPM
Noise volume: 22.5 dB
Dimensions (W x D x H): Radiator 120mm x 157mm x 38 mm, Fan 120mm x 120mm x 25mm
Weight: 932 g
If you are looking for efficiency then you can stop your search as the Arctic Liquid Freezer II 120 is the greenest water cooler on this list. When your CPU no longer needs cooling then the Arctic 120 will lower both it’s power consumption and noise level by reducing it’s speed. This can save you a heap of money in the long run as well as lower your overall carbon footprint!
Maintenance is simple and straightforward as the closed loop system never needs refilling, once this CPU cooler is set up inside your computer you can just leave it to work its magic. The backplate is a solid copper plate providing extra thermal conductivity sapping the heat from your CPU and passing it down the copper heat pipes system. Heat transfer is what water coolers specialize in and this one is no different.
Not only is this Arctic Liquid Freezer II 120 one of the greenest options you will find on todays market but it also offers superb cooling capacity, your CPU will be ice cool. Superb heat transfer and cooling fins make this a contender for the greatest cooling for CPU of today!
10. Noctua NH-L9i
Intel Compatibility: LGA 1150, 1151, 1155, 1156, 1200
AMD Compatibility: AM4
Fan Speed: 600 – 2500RPM
Noise volume: 23.6 dB
Dimensions (W x D x H): 95mm x 95mm x 23mm
Weight: 385 g
PC’s come in all shapes and sizes, and if yours is especially small then the Noctua NH-L9i is the perfect CPU cooler for you. The compact fan design and low profile heat column operation fit snugly on any CPU case lowering temperature upon installation. No matter how large your RAM modules or VGA cards are this cooler should slot perfectly into your desktop no matter which form factors it falls under.
Automatic speed control helps keep this CPU coolers noise level down, slot this in your gaming PC and never have your teammates saying it sounds like jet engine again. Installation is a breeze adding convenience to this impressive package that beginner builders will more than appreciate.
If the other CPU coolers features today are sadly too large for your build then worry no more as this CPU cooler has you covered!
What should you consider when shopping for the best low price CPU coolers?
When it comes to deciding one what CPU cooler is the best for you computer, there are a multitude of things you should always consider. Not only is the size of the CPU cooler exceptionally important, but the method of how the cooler works too. There are typically two forms of cooler, Liquid CPU coolers and fan CPU coolers, and they both come with a host of advantages and even some disadvantages so its best to browse around before choosing one. We have created this guide to help you make the most informed decisions that you can as nobody wants to be at a loss when it comes to deciding which CPU cooler is the best for you.
CPU Cooler Size
Size of your CPU cooler is perhaps the most essential consideration you should make before diving any deeper into the cooler field. Your desktop will be limited both by the desktops physical limitations and the how large you mother board that you are currently using is. Before you start looking through the vast array of coolers on the market today, spend a few minutes figuring out your desktop dimensions as this can immediately eliminate any coolers that are too large. This is especially true when it comes to both water coolers and the traditional mounted fan cooler as they tend to take up the most space.
Although this isn’t necessarily a measurement, the CPU socket you are using too has an effect on what coolers you can and can’t use. Most CPU coolers will clip directly onto the case surrounding your CPU, which holds the CPU in place. Most modern coolers are typically compatible with almost every CPU there is, however there a few exceptions to this rule.
Always check compatability before hand just to be on the safe hand. This can be done by searching you CPU on the internet, especially on the manufactures website, and seeing what your CPU is listed as using. If you are unsure what CPU your machine utilizes or simply can’t remember then you can find out by going into your OS’s control panel. The CPU should be listed under the processor section with all the relevant details you need.
Keep in consideration all measurements when you are trying to find the CPU cooler system that is right for your computer. Also try to remember that the larger the cooler is doesn’t necessarily correlate with how well it is at keeping your CPU cool.
CPU Cooler Types
As mentioned in the previous section of our guide, there are two types of CPU cooling methods, Liquid and Fan coolers.
Fan coolers achieve CPU cooling by constantly blasting your CPU with cold air and help keep the air flowing throughout the entirely of your computer preventing hot spots from building up. When it comes to popularity and tradition, fan coolers are by far the most common cooler you will come across. This is due to them not only being cheaper than liquids, but also being in this business for longer. If you get a fan cooler you can rest easy as this method of cooling is one of the most tried and tested methods of keeping your CPU cool.
The other popular method of keeping your CPU cool is through the utilization of a liquid cooling system. Liquid CPU coolers are perhaps an overall more effective choice than an air cooling system as they directly apply the cooling method to the CPU itself. But as most things that offer better performance, you can expect to pay a lot more for a liquid CPU cooler than you would for a CPU air cooler system. This high price can be worth it however. Liquid models maintain your CPU’s temperature by passing a liquid of some form, typically water, through an internal piping system. The air that has increased in temperature that surrounds the CPU is passed by a cooler and the temperature drops rapidly. This cold liquid is then passed back over the CPU ensuring that the CPU remains constantly cool and you get the high performance you need.
Liquid CPU coolers also run the benefit of being much quieter than fan systems as you might expect. However, linking back to size, liquid models also tend to take up a lot more room so always ensure you have the space inside for such a system.
The design of a fan blade can impact both the cooling power and the airflow of your entire system, not just the CPU. There are a multitude of designs, some being extremely unique depending on the manufacturer as CPU cooling is an extremely competitive market. Thin plane edge blades are perhaps the most common and we would even go as far to say the best. They offer exceptional aerodynamics providing high end airflow and keeping the entirety of your system cool. Considering the style before making your final purchase can help secure the greatest cooling performance. Take your time to research the differences between the different designs and you will thank us later.
Directly correlating with the size of the CPU cooler itself, there are a few different fan measurements that you should be aware of. Perhaps the most popular size you will come across is the 120mm cooling fan. Commonly referred to as the “regular-sized fan”, the size of this fan makes it a perfect fit for most users and shouldn’t take up too much of your precious space. You may also come across 140mm and 200mm, these are usually used for the side of your desktop as opposed to cooling your CPU however some fan systems may utilize them in some manner so it’s always a good idea to keep your eyes open. Smaller ones are between 80mm and 100mm are also especially common when it comes to CPU coolers as they are small enough to fit alongside most designs without sacrificing cooling capability.
The price of a fan system shouldn’t increase too much based on how large it is, unless you are planning on buying the hefty 200mm ones. So if you are trying to save yourself money, you shouldn’t have to worry too much about searching for a cheap one as at most you will only be saving yourself a couple of dollars.
Size of the fan however isn’t the only measurement you will come across in your search for the perfect CPU cooler for your machine. You will also find the term Revolutions Per Minute, however this can play a really large role when choosing the cooler that suits you. So large in fact that we have decided to dedicate an entire section of this guide to it.
Heatsinks and Heat pipes
This topic has the potential to become a scientific paper regarding thermal systems so we will try to condense it into a much more palatable section.
Heat pipes are more commonly found alongside liquid coolers than fan systems, however they play a large role in keeping your CPU cool. Most decent CPU’s nowadays come with a stock cooler, known as a heatsink, which consists of multiple heat pipes to prevent your CPU from overheating. The task of a heatsink is to pull heat away from your CPU ensuring that your CPU constantly provides high performance. Although a host of stock heatsinks now are extremely effective, they still don’t quite match the power of purchasing a separate custom heatsink alongside your chosen CPU cooler.
Heatsinks can cooperate with both liquid and fan systems to ensure that your CPU never reaches dangerous temperatures. Fan coolers will help dissipate the heat the sink releases as it draws it away from the CPU itself. Liquid cooling systems will also utilize heat pipes to carry the hot water away from the CPU to the built in cooler, rapidly lowering the overall system temperature.
How effective a tower heatsink is depends on two main points:
- The surface area of the heatsink itself
- Thermal conductivity of the material used in a heat sink
Each material that is used by a heat sink has it’s own very specific level of thermal conductivity, so much so that it would be difficult to list each material and how conductive it is. But the main materials to watch out for when it comes to the best heatsink meterials are copper and aluminium.
Copper is the better material in regards to conductivity, however it is far harder to both manufacture and shape to suit a heatsink design. Aluminium makes up for this but sadly lacks the conductivity of copper. Therefore, highend heatsink designs will utilize both copper and aluminium pipes to provide you the highest cooling capacity you can get. There are other heat pipe alternatives such as rubber to keep your eyes open for.
The surface of the heatsink will also play an exceptionally large role in cooling your system. It is almost safe to say that the larger surface the area then the better the cooling it will provide. Just try to ensure that the area of the heatsink is just slightly larger than the CPU itself for the best cooling method.
CPU Cooler Installation
If you have ever installed a CPU cooler before then i think you will agree that it can sometimes be fiddly depending on which system you have chosen.
Firstly, and we can not stress this enough, always apply thermal paste before you attach a new cooling system. This is perhaps the most overlooked step when it comes to CPU cooler installation, but also one of the, if not the most important. Applying thermal paste can be a little tedious however as there are some things to be aware of:
- If there is already a layer of thermal paste that has been on your CPU for a while, then remove this before applying a new one. This can be done by gently wiping any larger sections away with a dry cloth. After any large chunks have been removed, you can then add a small amount of alcohol to the wipe to gently clean up the rest.
- When applying your new layer of thermal paste try to ensure you don’t add too much, as this can be more harmful than adding too little.
- Add a slight dot of paste towards the center of your CPU and gently place the heatsink down, this ensure an even coverage of paste across your processor
Fan and heatsinks will typically be far easier to install than a liquid system as they will usually use a mixture of screws and brackets. Once the heatsink, typically through the use of screws or a lever that secures a bracket onto your mother board, then you can attach your fan cooler. This will commonly be done with 4 screws that you simply fasten to your mother board or computer casing. Slot the supplied fan wire into the correct slot on your mother board, re-attach the panel, then boot up your machine as that’s everything sorted.
Liquid cooling however requires a few more steps, so when it comes to installing your liquid cooler always refer back to the guide that should be provided are via a YouTube tutorial. Ensuring you take the right steps to install your cooler is the greatest way of providing your CPU with the cooling capacity it deserves.
Other factors to consider when shopping for best cheap CPU coolers
Revolutions per minute
As mentioned in the fan measurement sections, RPM is an extremely important part of purchasing any fan regardless of it’s function. RPM is a measurement of how may times the fan a fan will revolve in a minute; when the the fan spins a complete 360 degrees. RPM is an extremely vital part of measuring how effective a fan cooler is, but it isn’t the be all end all. An extremely high revolutions per minute count will be almost nothing if you don’t pair your cooler up with a decent heatsink for heat dissipation. The size of the fan will also be important to work alongside a it’s RPM to provide the maximum airflow throughout the case. Sadly, higher revolutions per minute also typically means higher noise levels which can turn off a substantial amount of people. Finding the perfect balance between RPM and fan size is a massive consideration when it comes to ensuring the quality of your coolers cooling power. Sacrificing a higher RPM for a better heatsink and a larger fan could potentially be the better option.
Is socket compatibility important?
Most modern CPU coolers are compatible with most sockets, however it can vary between specific CPU brands. Intel and AMD tend to use separate sockets, meaning you should always check what your CPU uses and what coolers you can use. Checking this before many any purchase can save you a boat full of hassle further down the line, so it’s always worth spending a few minutes making a note of the socket that your CPU uses. Again, if you are unsure on your computers CPU then your operating systems control panel as most will have it listed somewhere.
Is An Aftermarket CPU Cooler Worth It?
Yes, it is an incredible addition to any computing system and should be considered by most heavy users. It is pretty safe to say that stock coolers are improving as time goes by, however they still can’t compete with a custom bought aftermarket CPU cooler. This becomes especially important if you decide your processor needs overclocking as this can increase the temperature rapidly and sadly most provided CPU coolers can’t keep up. It is also extremely rare for a processor to come with a liquid CPU cooler, which as you can probably tell we are very fond of. Liquid cooling systems add a whole new degree of cooling performance to your system and should definitely be considered by all heavy computer users.
What’s the Best CPU cooler for gaming?
There are a multitude of components to take into consideration when it comes to deciding what CPU cooler is best for gaming. After much discussion amongst the team and debates regarding CPU coolers we finally decided that the overall number one pick for gaming CPU cooler belongs to Corsair H100i Pro.
Not only does it feature a stunning design that will compliment any computer but it also offers insanely impressive cooling technology. The compatibility with the iCue software letting you control this device through an application is just another added bonus. This is without a doubt our pick when it comes to CPU coolers built with gaming first!
What is the quietest CPU cooler?
Surprisingly our pick for the quietest CPU cooler isn’t a liquid cooling system although they tend to be far quieter than their fan counterparts. Our number one pick for quietest CPU cooler goes to the impressive Be Quiet! BK021 Dark Rock. After putting it through its paces for hours on end we couldn’t believe how low the average noise level of these air coolers are. No matter how much we pushed the CPU on our test machine this CPU cooler barely made a peep.
If you are looking for the best air cooler in regards to noise levels then look no further as this incredible slice of PC hard ware has you covered!
What is the Top i7 CPU Cooler?
Most CPU coolers offer compatibility with an i7 CPU however we compared all the CPU coolers we featured today and decided on our overall pick for greatest i7 compatible CPU cooler. Thanks to an impressive 41.2 mm contact area and perhaps the most unique design amongst cooling towers, the MasterAir G100M is our pick for the greatest i7 compatible CPU cooler.
Incredible heat column technology making heat transfer a breeze and support for color lighting make this a standout pick amongst a whole host of excellent CPU coolers. That’s not all this CPU cooler offers however as impressive durability makes this a great pick for the overclockers amongst you.
What is the Top Cooler for an AMD Ryzen CPU?
Everyone knows that although AMD have almost caught up with Intel the in the CPU market, their CPU’s still run a higher temperature than most other processors. Which is why our pick for the greatest AMD Ryzen compatible CPU cooler is the astounding Noctua NHD15.
This CPU cooler might not be the most aesthetically pleasing but when it comes to outright cooling prowess, it could very well be the best CPU air cooler today. Large size and easy installation make this a worthy piece of hardware. Heat transfer is rapid and a functional fan design works alongside the aerodynamic aluminum fins to keep your CPU temp low.
What is the Top RGB CPU cooler?
After weighing up a whole host of pros and cons, and what we think makes one a better design than another we finally cut it down to two choices. Giving multiple choices however would be lazy which is why our all round decision for this category goes to the Cooler Master Hyper 212RGB.
This is the brightest option featured today by far and if you want your PC to stand out then this is the best CPU fan for you. But just in case you are wondering, it was between the NZXT Kraken as well, due to it’s sleek and futuristic infinity mirror display which you can’t help but love.
Heat transfer to keep your CPU low is an important part to ensuring that your computer last as long as it can. Our list has featured a whole host of options from CPU coolers using the latest heat column technology to low price pump CPU coolers. Whatever you are looking when it comes to CPU coolers we hope you have helped find the perfect CPU cooler for you!